This is my second attempt of writing this article, whereas, by dumb mistake on my part and not watching carefully enough I accidentally deleted my last article that took me over a week to compile.
Well, I written ten hours of this article and it just got accidentally deleted by yours truly! Sometimes, I wonder if all this information is worth it or not!
Flame didn't go out quite yet! So, I will try to re-write some of the lost articles. Sort of bummed right now! This doesn't usually happen to me but it did today!
I am currently in the decision making process, my wife wants me to order TrueRife System, that has been proven year after year for its users. Yet, the price also reflects these proven works. I admit, she is correct!
I do have enough time after 20 Jan 2021 too decide if I should get the TrueRife Frequency Generator below and the accessories I need or order the Spooky2 Scalar with the GEN-X. It boils down to two things, what I am planning on using it for and of course the costs!
But the problem we have or should I say, I have is, the amount, the costs $7000.00 for the TrueRife plus $2000.00 for the BIO-Well! BIO-WELL! Why do I need something like this? There are many reasons, why many people need equipment such as this.
My reason was, I want to check my "auric values" that represent the human energy body and organs. Taking a reading "before" and "after" using the TrueRife or Spooky2 Scalar devices, about five days after would be a good enough analysis.
This will help me get rid of what is not working and keep what is working for us as frequencies go. Using the either GEN-X or TrueRife F-122 Frequency Generator! GEN-X has 6 different full body scans whereas TrueRife has just one!
This BIO_Well is interesting piece of equipment. It's made in Germany based solely on Kirlian Photography. Once you expose all your ten digits inside the machine on the glass plate inside the box it will send an electrical charge (hardly felt) it takes that picture and create some very interesting charts, such as the one below.
What it boils down to is the overall costs for the TrueRife! $9000.00 total, which includes the BIO-WELL or $4000.00 for Spooky2 Scalar along with the GEN-X frequency generator and a "Digitizer" and this price includes the BIO-WELL also. I will use the SE-5 sending information out using the scalar field.
This analyzer, (BIO-WELL), is $2000.00! I check other Auric programs in the USA, nothing less than $7,000-$8,000.00! The price reflects their fancy software and a small camera and hand sensitivity plate, that picks up on your pulse rate and digitizes it in realtime. "Real Time" is the reason for higher pricing!
Two companies that use Rife and various other modalities, know how biofeedback works and by using Galvanized Skin Response (GSR) type mechanisms, they allow frequencies to go through the body and wait for an echo response!
True Rife uses a modified "Lie Detector" unit to scan your entire body. Spooky's can do this and five other types of scanning, that was modified for the Rife work. The second of course is the Spooky2 it uses six different modalities for body scanning with the GEN-X, frequency generator. I am still studying all six ways.
Right now I am making a case for both TrueRife and Spooky2 Scalar! We know what the individual costs are and we know both have different ways of scanning the body! Yet, you still need another analyzer software program that can read your stress markers in numerical values! So you can get a "Before and After" body scan, to compare it to each other.
The Spooky2 Scalar contains both a "receiver" and "transmitter" case. This is built by a John White from the Netherlands and sells it through a province of China. It just keeps getting better and better! It is said, "Only Nixon could visit China"!
It is a real rugged instrument and built into their own pelican carrying cases! What I am considering, that is my wife and I, are the final costs involved in these technologies!
We realize going into these types of devices, that it will cost money! Will it sit only in your closet and collect dust or is it going to be used? Many of us out here from time to time, have a closet full of machines collecting dust.
TrueRife flagship frequency generator is called, "F-122"! Keep in mind, the machine can only put out 10,000 Hertz. TrueRife knows it could never reach Royal's Rife's frequency being limited to ten thousand hertz. So they divide down to reach at least harmonics.
The TrueRife technologies are very expensive and nothing seems to come close to the workings of this instrument and its software is impeccable!
The double bubble bulb puts out 1800 DC volts, as to the "why" of it, because it doesn't use any carrier waves and it doesn't have to, with this much voltage being produced!
But all his "accessories" some, which I have to have is an average of $3 to six hundred dollars in price. The most expensive is the TrueRife generator it by itself costs $3000.00 plus the software and updates for life etc.
Below is the GRS-II Whole Body Scanner. He sells the electrodes (sticky) with dual patch cord, it's a lot easier than it use to be. The scan will last around up to one hour using TrueRife but GEN-X Scalar Rife only takes six minutes! Before, the company used the "XM" generator (blue color) and it took up to 2 hours.
I read lot's of testimonies, the only two complaints with TrueRife, it's so expensive and most like myself, need some of those accessories they offer, so I can flawlessly have no break in the use of this device. $3000.00 costs just for the heart of his EM Rife machine, the F-122.
For example: The TrueRife Scanner an accessory, scans the entire body and detects frequencies your body may reject, all this is automatically recorded and an alternate program is created to counter the bad frequencies, that you can run anytime after it is saved.
You keep this up once every couple of days and you will see, less and less being detected, as the days go by, you will start feeling much better. Does it ever go away! I am afraid, as along as we are human there will be always something to use this machine on.
Below is a picture of TrueRife's accessories, this is called the "Hammer"! It is used for overnight sets. You may want to use this accessory device, if you have a bad cold or flu! I have my work cut out for me trying to calm down my wife about the Scalar purchase.
The other accessory that is important is the double bubble bulb but the "Hammer" straight bulb above the newer one is covered in crushed crystals for a greater refraction and harmonics, when running the current frequencies from TrueRife folders! They are located in Michigan I believe!
My wife is a bit nervous of paying thousands of dollars in China and the way of China, is not so good for trades in this era and we are now in a Cold War with them. It's only going to get worse! So, this might force my hand to decide yeah or nix, on purchasing these machines.
I can't argue with my wife on these facts. I was really interested in this Scalar control boxes that have both "transmitter" and "receiver" units. I purposely blinded myself of all outside influences, now I am personally talking to a new owner from CA. about the Scalar Device he purchased.
When one doesn't have the money to purchase such tools needed for their research, they dream a lot of what it would be like to own it and what it could accomplish for others (loved ones)! Why is it, when a person does paper trading a stock, they always do well, but when real money is put down, most lose some or all it!
When purchasing the Spooky2 Scalar, I have to pay extra for their Rife frequency generator called, "GEN-X, it's around $700.00 for total of $2200.00+ and this includes the "Digitizer" also!
My wife is aware this is less expensive, but cheap isn't always the best way to go! This I know also. Digitizer measures small amounts of frequencies your body puts out when the scalar device is activated.
I can't argue her (The Wife), counter thoughts, because I taught her about TrueRife for the past seven years! I was planning on purchasing it once all my bills were paid off and this happened this week!
When you put any money on the line, no matter which machine your going to buy, a blast of commonsense will override your strong desire to immediately purchase these devices blindly! You already fulfilled the first part of it, you dreaming about owning the device and what you could do for yourself and family.
Why is it, when one has the money, one becomes much tighter in their approach to purchasing, what was wanted for many years before you had the actual wherewithal to purchase it! I believe this is not a fear but a weight and balance check with your commonsense!
Like paper trading a stock you have no skin in the game! Once it happens, then your nervousness will allow you to sink your own ship! I've seen this happen for over twenty years, I use to teach people how to paper trade and once real money was on the line, they buckle.
It seems, when you don't have the money, one's minds is made up but now my tire is stuck in the mud. This won't be like this for months, you see, like you all, I have to make financial decisions because anything I purchase for my research will domino into the future.
I saved over one hundred YouTube recordings from John White a very humble man to be sure, of all his Q & A and "How To's" and "What If's", and his instructions about the software and all the equipment etc.
TrueRife company (Mike) knew what he was doing, when he chose to manufacture accessories that would be needed as a package and each package will be different, for different people! You may not need the GSR-Scanner for example, that costs an extra $600.00!
It was just the $7000.00 that I had a difficult time to choke down! His frequency generator is top of the line! The heart and soul of his system is both the F-122 Software and the F-122 Frequency Generator from TrueRife!
But it has its limitations only goes up to 10,000 hertz. Rife used thousands more than listed here to kill these pathogens. As he ran these frequencies he would look into the microscope he built and could see them dissolve right before his eyes.
He, (Mike T.) has many expensive accessories! Some of which, are needed at the time of purchase. We know the generator is $3000.00, we still need the double bubble radiant bulb and a stand to secure them in place.
Plus, if you understand the frequency foot bath and what it has done for people, you may want to consider ordering it along with the heater accessory $100.00 extra, you definitely need this up front, because the water can get really cold after a few minutes! But it does miracles to your body!
I know personally, when one is ready to purchase an expensive Rife Machine, you want to make sure you have ready made programs instead of just a list of frequencies and what they are used for, like the CAFL. If they don't have this, you better be a programmer and spend a huge amount of time putting those into individual folders with like frequencies for the cold&flu etc.
Getting back to its software, these folders are subdivided into certain categories of issues, that people need to fix. When something new has broken out, the "update" button would be used to install the new programming into your files automatically. F-122 Software!
Someone from the Rife group, came up with their own programs and found it was successful and they pass it on to Mike at TrueRife and he sends it out for free, to his update center! All you have to do is push a button icon and it is downloaded to your software ready to go!
How many times do we press this "Update" icon button in a month? It depends upon you. My wife loves this feature a lot! If I could purchase both of them, (TrueRife, Spooky2 Scalar) I would!
I love the Scalar aspect, which TrueRife doesn't have and the six ways to do a full body scan in the scalar instruments and Rife has only one. More "opinions" or more ways to be measured, help draw the story of what is going on with you at the moment!
This is my case! I can't find much fault other than, high pricing with the company of TrueRife! I could get away with $6000.00 and I wouldn't need the BIO-WELL! Because TrueRife doesn't do scalar, like the Spooky2 does! When running scalar you can't detect with your five senses, the secondary analysis programs helps us see if it is doing any good for us!
Example: Colds and Flu. When we click on that particular folder, all the frequencies by title, will be in folders and we can copy and drag and drop with other programs!
TrueRife's YouTube training videos are really good. If you want advance workshop video, this would cost you $100.00! He has several workshop videos to choose from. Some are $50 up to $99! Nothing is cheap with this dude!
You can do this with as many programs you want to radiate inside you. The bulb in TrueRife puts out 1800 volts to create the EM's. I can purchase packages but the cheapest package is $5500.00. The only reason is I need both footpath/heater unit and scanner GRS-II device.
Look out switching to a new track! GEN-X below, is quite the competitive Rife Machine! If you are into programming additionally this will have a lot to offer the Rife Researcher! I like to keep it simple for myself! It too, has built-in programs to use when needed. If you are stumped their customer service from what I experienced recently myself, was impeccable.
I only wish GEN-X was that easy, but the gentleman from CA. told me, it's easy, once you are using it day after day! I have not seen any screen shots from Spooky2 of their GEN-X software built-in Library. Spooky2 GeneratorX. It did show up on YouTube briefly, it has over 50,000 frequencies at your finger tips and what they could affect.
Each Generator X contains 2 function generators, each with 2 outputs and full biofeedback function. GEN-X can run at 40 MHz with any waveform, and can also load up to 30 programs from Spooky2 software to run standalone without a computer.
- 2 built-in function generators, each with 2 outputs.
- Fast full biofeedback function – a biofeedback scan which takes an hour with Spooky2 Pulse, now takes just about 6 minutes. No more sitting (or lying) down forever, waiting for a biofeedback scan to complete.
- 40 MHz maximum output with any waveform.
- Standalone capability with up to 30 loaded programs.
- AM modulation between any waveform.
- Up to 5 kHz gating (at any duty cycle).
Let's take a look at the inside of this small GEN-X Frequency Generator:
Here it comes a slight switching of the tracks! I want you to know as a TrueRife owner, you will be able to acquire from the "Frequency Protocol Services" website, he can write a custom program for you! Another one that either device when used can benefit from DNA Sets!
There is a frequency site called, "Frequency Protocol Services that custom makes frequency sets for TrueRife owners! There is a DNA site that researches and gives you the frequency sets for different issues! You can purchase in packages as well as singles.
Custom Frequency Sets:
https://www.frequencyprotocolservices.com/about.htm
Custom DNA Sets:
https://www.dnafrequencies.com/human-sets
Here we go, we are back on track! As with the Spooky2 Scalar, their software is in their custom made version of Rife frequencies, it seems a tad complicated but that is to due with the unfamiliarity with it! This software must able to run in the Scalar modes of Spooky2 Scaler units.
It would take a few customer services calls and talking with real owners on FaceBook, so you know what it is you're trying todo. They have quite the dedicated group of owner/operators in FB. They too are good getting back to you!
It's all over YouTube! There training is all over, I read good testimonies! My wife is not thrilled with me visiting the Province Site for such a device. I could only tell her, this is the 21 century and no nation is going to refuse to cash your check or charge your cards.
I checked everywhere and believe me I am on the web sometimes 15 hours a day, looking for the latest Scalar products with the middle of the price range, not too cheap and not too expensive! Always remembering why you want it and what are you willing to pay for this! Lastly, how easy do you want it, when operating it.
The trainer and developer/builder and user himself is John White, from Norway! He, just sells through this company in China. He and two other individuals and one that moved on were responsible for the finish product combining Scalar/Tesla Coil Technologies under each plate in or around 2003! It took about one year from paper to finished product.
My wife is not trying to be racist for her comment to me, she doesn't want me dealing with China due to political firestorm that's currently going on, she herself is Asian, Filipina! She is trying to protect us and our monies! As you are now aware of the costs that are borne by us.
I got to find and book marked over 200+ YouTube videos by John White which contains questions and answers and what if's and all the "when's", "why's", and the How's etc. It was nothing less than exhausting hunt and destroy my question mission.
Below, the only reason I am interested in my gold is because one has to have something like this to afford some of these Rife, Scalar/Rife machines. None of these machines are cheap! I purchased Gold all six ounces at $1200.00 per ounce! I will use three ounces to purchase whatever device, I decide to use.
Outside in the mammoth markets, my gold and silver is fluctuating, I am waiting until 20 January 2021, if Trump gets re-elected, my gold will skyrocket or if Biden gets elected, printing of paper money will skyrocket making the US dollar worthless for the Green New deal! Either way I am secured for no!
As mentioned in the above paragraph, if Biden remains the president elect, I. need to "sell" just two ounces! Dems hate Gold, they live for the Central Bank! Paper money is where it is at! Print, print, print! Gold and Silver will climb, climb, climb!
In any event, I only have 6 ounces of gold and 70 ounces of silver all in coins, I am hoping I only need to use 2-3 ounces of the Gold to complete my purchase, no matter what I decide to do. Keep the additional 3-4 ounces at home.
Give a little and take a little, not one device has it all! One builder focuses on power but he or she might not be much of a software program developer. He or she likes working with their hands. While problem solvers, who build Rife devices, work with their minds and create a powerful software program but fail to meet the mechanical/electronic side of the equation.
Keeping in mind, out of all the years I waited for a Rife device and I seen them all like PERL, GB4000 etc. I can only purchase one and that is it! Sometimes that is the stink of it, you like this because it has this option and you like the other because it has another option you like, that the other lacks.
So, I have to do diligent research and decide by 20 Jan. 2021. Sometimes you can't get it because you don't have cash and the next you have cash and don't want to have to choose! This is where I will have to depend on two factors: Research and Gut Instinct!
None (PERL, GB4000 etc.), can come close to the software information such as (TrueRife). This alone can make and break other companies competing! Seven thousand dollars for TrueRife is not for small home use, it was geared to homeopathic doctors and Chiropractors etc.
Make no mistake, the GB4000 is a powerhouse! It seems no Rife machine has it all! Get power, give up software ease, find good Rife software give up power by limiting yourselves to 10,000 hertz! I am sure there maybe middle ground!
There is nothing wrong with this device, it is based on Rife's true version using RF (radio frequency) carrier wave! Now get this, EM Rife like machines were never proven scientifically to work, if they did Rife would have adopted this and it would have been less work for him overall!
I will try to break down the GB4000 and its accessories!
https://www.thegb4000.com/p18c6/Featured-Products/M.O.P.A.-Combo-Pack#1
It wasn't a week later, he wrote to me and said, I don't know what to do here, they have built in frequencies but nothing under diseases or minuscule issues that come up from time to time. I have to look all over too fine a group of frequencies that are related to each other.
It's (GB4000) Rife machine, it has the power, but unless you are able to program it to make it run appropriately instead of hunting individual frequencies all over the map so to speak, then the device, just becomes an expensive paper weight!
He, the (GB4000), the new purchaser, I accidentally come to know, told me, "Do you remember what you told me about the individual folders with TrueRife software? " I said, "yes" I remember! He said, I guess I have my work cut out for me.
"With TrueRife software, just click and pick the special newly developed frequencies for current issues and ones that worked and are still working in the past will be kept in their perspective folders."
You can copy and paste frequency programs to be run one after the other! TrueRife Software is that easy. Don't let this fool anyone! There is 1800 volts coming out of the powerful bulbs with Nobel gas!
I am not sure if they (GB4000) company, do or don't have a software program, they very well maybe! I am giving you my research of four years ago. I will go to their site and figure out what prices and software they have to offer.
He, the one who purchased the GB4000 told me, he didn't have folder accesses and it didn't have the folders with specific and related frequencies to access. His GB4000 software program wasn't setup like TrueRife, making it just another expensive paper weight device, if you don't know how to program and categorize for different issues!
He knew nothing how to setup hundreds of folders with proven frequencies for different issues. He just got a pdf of a bunch of frequencies (CAFL). Oh joy! Now we are in business! :(
He told me, "I will just experiment and see what each frequency does and document it. Good luck! With over 50,000+ Frequencies to test! Of course, I never heard from him again! I am sure a year from now he maybe halfway finished or given up.
They, the company (GB4000) told him, they are not publishers, they sell the machines, its up to the buyer to know what he or she is doing! I chuckled and couldn't resist to say "I told you so"! You buy a car brand new, the dealers can't teach you how to drive, this is up to you! The just sell the car!
At the time of my research, I couldn't come close to owning the GB4000. It was way too expensive at the time! It sounded great and it has hand metal cylinders and metal plate to place your feet, to make you extra conductive, I would suggest using a "grounding" mat you plug into the wall. Damper it and make it safe for use!
I told him, if it is any consolation at least you own one! Up to the time of this writing, I am finally in the process of deciding what to buy! It would be a no brainer if Fancy Nancy would approve $1200.00 per adult, problem solved!
If the MacBook Pro had a bad OS X, and the filing system (software) was all over, no one would buy it and if they did, they would own an expensive machine with no reason to use it or the know how to program it! Most people are computer illiterate!
The programs must be accessible within a few clicks. I've been using computers since the early 80's! I still can't program these to save my life! What type of machine language do they even use today? Atari was hard enough with its machine language! LOL. C+++?
Again I don't want the pro's and con's to be the only reference to decide what is best for you. The GB4000 is a remarkable machine! It will just take a little concentrated effort to organize personal programs into a device like this. It's costs: $4200.00 with a 30 foot outward reach through the plasma when activated!
This was the position he thrusted himself into, when he didn't use research by talking with other purchasers! A person, who never used a computer driven True Rife software, can pick it up in five or so minutes in running the program they would need to fill their individual needs.
With a little study time, they can program their own frequencies from their favorite authors using TrueRife. I purchased their 179 page Desktop Reference Manual, on different ways Rife users, who used these devices and how they medically got better!
They (TrueRife) have a "Pre-Shell" you can fill in with your own picked frequencies! In this "shell" of the program it tells you step by step what words you can use and how to place your frequency numbers so the F-122 accepts it. You can pick this up in about five minutes!
Now we are switching over another terrain, we are going to investigate the Spooky2 Scalar instrument and some of their accessories. I collected nearly 200 YouTube videos of Q and A's and "How To's" and other things John talks about.
I am now listening to John White on YouTube being interviewed, on how he started designing and building these scalar generators. There were three of them working on this plan, coming up with a design and schematics on how to build this.
John said, "I wanted to create the only Scalar generator in the world capable of Pure, Molecular, Rife Scalar deliveries". They studied Tesla's patent and Rife's patent and what we now know in this century. That is all the further I got with his information and there is much more to discover.
I still have 59 minutes to watch his video, it is video #79 or #80. Next we have a testimonial of one of many thousands, I wanted to tell you a story of this particular testimony. This guy, who was using his devices in the Molecular Scalar mode. (Spooky2 Scalar) Transmitter and Receiver units.
You have to have a strong stomach for this one. There were over a thousand people in the UK, who use the Molecular Scalar and they are thrilled to the bone with the results. A lot of the testimonies these customers had, came from using the device from 2 weeks, 4 weeks, 60 days and for a year or more!
I never in my life read a testimony like this before! Then again, I never in my life come across the Spooky2 Scalar! This was built I believe in 2003! I knew Spooky had the XM generators, those blue one's for sale online and many customers swore by them.
This customer, he placed a petri-dish with some lavender and placed it on the Receiver/output tray and placed himself in the middle between the two machines, these were about 30 feet or so apart from each other with their lids facing to the other one from across the living room, while watching some T.V.
Everything was going fine and he forgotten temporarily about his Molecular Scalar run. He set the molecular scalar up by placing a Petri dish with lavender on a spot marked on the "receiver" input plate! You should have the lid off when doing this mode of operation.
Within about 10-15 minutes or so, he was getting flushed and tasted Lavender and felt cold and hot at the same time and felt the Lavender on his skin and some abhorred taste in his mouth! He was feeling high and depressed and anxious and his blood pressure was rising.
Sometimes he felt sick and weak. He thought he was Herxing or just having a bad reaction! He had no idea that another species was in the same scalar field inside his Lavender sample dish!
He decided this isn't working for him, he got up to remove the petri-dish from the receiver and notice something in it, upon getting closer he discovered inside the dish was a dead moth, it was still quivering before it finally died!
Using the Scalar is sort of unknown here in the USA. Even when John White and two others, who helped him design and build his devices, also knew no one in the UK or Asia or the USA, who have ever attempted to build such a device! Everyone was concentrated worldwide with Rife Machines.
When the moth landed in the Lavender on his Receiver, it was digitally copied by the active scalar field, the dying moth and its agony and became part of the person, who was in the scalar field (capacitor). It could have been is pets or his wife! Either way they all would have experienced something unnatural.
If your loved one's were in that field he was currently in, they too would have experienced something not good, maybe not to his extent because everyone is different or maybe far worse!
I think I would have my mother in law try it by sitting between them and placing a moth in a petri-dish to ask her what it tastes like! Just kidding, I love my mother in law from the Philippines!
Because, (he) was the receiving capacitor, his body took everything inside himself from the being inside the scalar field. Yuck! Is putting this lightly! He said, it took a few days to take out the memory and bad taste in his mouth of that ordeal.
This Spooky2 Scalar devices don't need EM's or Radio Carrier Frequencies. No carrier wave frequencies. The aether being punched through too. The scalar waves becomes a natural standing carrier wave! We can send frequencies into this scalar wave by his specially designed GEN-X which hooks into the scalar devices and your computer!
He was trying detox programs, to be able to get rid of the nauseated reflex turning his stomach. I bet he will put a lid over it and maybe drill holes into the lid so to keep out unwanted guests. What if it was a big house spider! EWWWEY!
I know of (no) TrueRife or any other EM instrument or RF instrument that's able to produce scalar and adapted to its use as Molecular Scalar. Transporting those same Rife Frequencies inside the scalar field. My SE-51000 has a small scalar generator, enough to send only information nothing like surrounding the operator.
Yet, he (John) designed the scalar transmitter and receiver by building both Rife technology, with Tesla's workable technological theories. By placing your hand over the coil of the transmitter with a Florence tube in that same hand, it will light up!
Testimonies about products can sometimes be misleading! Yet, in this market jungle, you still need to research and in fact, much better yet, to be able to contact them and find out yourself how they felt about their machines and their opinions as to recommend them to anyone!
Is this theory for Spooky2 Scalar? Right now a work in progress!" There are thousands of "purchasers" leaving online their testimonies! Some after thirty days results while some only days, some after weeks, and others after months and many after many years!
Whether good or disappointing, the company allows everyone to read the testimonies about all the Spooky2 Scalar and accessories he sells. Surprisingly, you will see testimonies of people owning them for years without mechanical difficulties or power loss.
John said, they take these testimonies seriously and if need be, the company would enhance their product, if something is wrong or hard to use from the complaints! Their customer service is impeccable, I am not even a customer and they get back with me with a detailed email about my questions, in fact several times.
This is where I have to walk the talk! Either way, I will not be sorry for my decision one way or the other. Because I did my research well for both the TrueRife and Spooky2 Scalar. Below is the setup I am going to purchase more than likely!
As you already assumed, a thousand testimonies means, a thousand different manifestations with the same machines. This has been the hardest pick in my entire life, when it comes to scalar. As far as, star rankings go, I don't trust them, pure and sample.
The book on Rife frequencies by Spooky on Amazon is given a 5 star out of 179 people. The book was written by Spooky, which prepares you to learn about the software and your individual equipment, you will be using showing everyone the proper usage.
That scalar had been proven to exist and harnessed by machinations around the world from Tesla's plans and all his plans were scooped up by FBI and the Military after he died in his New York City apartment. A coveted secret for their eyes only!
Those scalar devices such as questionable pendants and other static jewelry are nothing but pure placebo they have no direct interaction to use scalar. There are some pendants that are made of lava rock and the negative ions can be recorded! As soon as it touches the skin it becomes activated surrounding the whole body in the negative ion field.
The question to be asked is, can three individuals from the U.K. put their heads and minds together to create two machines that is able to create scalar energy by using two machines programmed 180 degrees out of phase to each other, apposing one another to create scalar? Since 2003, many customers seemed to think so. And the company stood the test of time in the U.K.
I can purchase this equipment with a 65 foot umbilical cord that connects both machines together to work like a single entity for extra costs. The second thing, I want to go with the package is the GEN-X Rife Frequency Generator. This is a Rife Scalar Generator specially designed and built to work in tangent with the transmitter and your computer.
Most so-called scalar devices use the placebo effect. However, the fields produced by Spooky Scalar are strong. The company uses analog circuitry to ensure a pure signal, and the signal can be either molecular or frequency modulated using low or high frequencies.
Spooky Scalar transmitter not only transmits energy but also takes energy from the aether. The aether is the “space” around the nucleus and electrons of molecules. Some people think of aether as “air”, but air itself is composed of molecules.
The picture below serves a mighty purpose to explain Scalar! See the "Dot"? See the empty space around the dot? That empty space represents the scalar/aether field! The dot is "you"! When your machines are out of 180 phase with each other, they rupture an opening to this scalar field temporarily until you shut down your machine!
Imagine a picture of a molecule on a white piece of paper. The white represents the aether. In outer space, very few molecules are floating in the vast expanses of vacuum, but there is an abundance of aether.
Scalar waves are not electromagnetic waves. If it was a wave, it will lose power over distance (Inverse Law). But because it is a scalar field, the aether adds to the strength of the field and it doesn't weaken the further out you go.
When Spooky Scalar is running, you can’t see much happening. You can push the tuning light and you can see the tuning light coming on, indicating energy flow between the transmitter and the receiver.
Technically your five senses will not be able to detect the scalar but you will see or feel the results of it! Some but few, can feel the scalar those lucky psychic or sensitives can even tell you how big it is without a TRI-FIELD meter!
Spooky Scalar is the first scalar treatment device to provide three different methods of transmitting healing scalar: "pure" scalar, "molecular" scalar and "rife" scalar. You can choose which of these best suits your needs. Scalar occupies space and increases spatial mass.
We know that scalar will go in all directions but what John and is partners accomplished, is like a plasma ball. The scalar reside inside the globe, but when one touches the outside globe you become connected as soon as you touch the plastic or glass causing concentrated scalar to run through your body!
Spooky Scalar has both a "sender and receiver". The sender is tuned to the receiver, so they are perfectly linked. There is only a single cable wire between the two. A scalar field is only produced, when the two units are tuned. There are several ways to tune such machines.
These two machines become a "charge-coupled", effectively becoming one entity; one transmitting regular electrical signals, and the other returning the signals in the form of a scalar field. The lids become a transmitting antenna of scalar energy, with a scalar field between them.
The "return path" is the space between the lids. The scalar field goes in all directions (like a wet blanket), but a receiver will absorb this energy, in a similar way to the ionized gas in a plasma ball. Whatever is in the middle of the machines or on the output plate will be affected. (It's a 12v system)!
These machines focus this energy and pulls it into whatever we want it to go to! Pure Scalar is the most simple to use. Set up six feet apart coupled with one male end cable cord, tune and sit or lied down between the two fields.
With a plasma bulb, the finger absorbs the energy, and a stream of electrons passes through the glass to the finger. When this happens, the energy becomes more focused. This is because by touching it with your one finger only, you created a new and easy pathway for the protons to travel.
The person being treated sits between the sender and receiver, and they also become a "tuned receiver/capacitor". The two machines create the plasma globe field. So to speak! Scalar is not talked much about in the USA. Just what sales "Rife" Machines! There good to have but Scalar in my opinion along with RIFE is the way to go!
All you have to do is be in it, and you will automatically be drawing in the protons from the existing scalar field. You are a living capacitor! You can use a TRI-FIELD METER to measure the smaller scalar field with boxes 6 feet apart. If you are 15-65 feet apart, you couldn't climb high enough to measure it or go wide enough!
My all time favorite is "Molecular" Scalar! Place anything you like and the built-in Tesla Coils will digitize it, and I don't know exactly how at this time. Never needing additional medications.
Spooky Scalar can be used this way, but there are more options. If a substance is placed on the receiver, molecular modulation alters the returning scalar field. Many, if not all, experienced the oils or other medications from within the scalar field. In a rare even you don't, it is still working and you will see the end results of your patience using it.
The "modulated" information invokes biological changes, as if you have the substance inside your body. This was figured out in 2003 by John White. Remember this is all "anecdotal" evidence! No scientific investigation for such instruments. This Scalar producer is not radionics or psychotronics!
Health products or drugs can also be placed on the "receiver coil". Your body then, has the effects of the compound without physically touching it and this is not based upon radionics. It's based upon several frequencies programmed into these machines and using the active scalar all around us!
Scalar occupies a dimensional space with our current reality! It can only be focused by the two machines. Transmitter tunes both devices and the transmitter sends EM signal to the receiver and the receiver sends it back with 180 out of phase wave form. Both EM transmitter and the receiver produce 180 degrees out of phase wave that cancels each other out, thus opening a scalar field.
Most so-called scalar devices use the placebo effect. However, the fields produced by Spooky Scalar are strong. The company use analog circuitry to ensure a pure signal, and the signal can be either molecular or frequency modulated, using low or high frequencies.
Spooky Scalar transmitter not only transmits energy but also takes energy from the aether (self charging). The aether is the “space” around the nucleus and electrons of molecules. Some people think of aether as “air”, but air itself is composed of molecules.
Imagine a picture of a molecule on a white piece of paper. The white represents the aether. In outer space, very few molecules are floating in the vast expanses of vacuum, but there is an abundance of aether. We just need to focus energy to leach it in our dimension of laws and physics.
One thing about Spooky, when it's running, more likely than not will you be able to use five of your senses to see if it is working and that just maybe after the fact! Get two pieces of fruit (Nectarines) easiest for this experiment and run a preserving program for two weeks on one and watch how long the fruit last, compare to its counter part fruit not in the scalar waves pathway. You only need to do this once each day!
Scalar waves are not electromagnetic waves. If it was an EMF wave, it will lose power over distance and Inverse Law of Physics. But because it is a scalar field, the aether adds to the strength of the field. Unlimited fuel sourcing!
Do we have anyway of proving it exists? Not on this side of the dimension, but Maxwell's theory is just being realized in today's quantum science research!
Scalar just exists, we are not creating it with the two devices, we are opening up what is already there! The machines just replicate the right frequencies to gain access or a window into it.
Like the Apollo before it can enter into the earths atmosphere, it has to find a mathematical window or it would be crushed out of existence. As long as we live and breathe on this side of the heavens, there are rules and laws we must go by.
What can any of us expect when using raw scalar energies? Get a hundred people to use a hundred of these two devices and you will get thousands of different testimonies that we're beyond "placebo"! I want to couple my SE-51000 to the Spook2 Scalar and run my programs directly into the scalar field and use a picture on the transmitter or whatever you want to send to them.
Like attracts like! Many radionics devices claim having to be able to access a very small percentage of scalar, which only allows "information" to flow into and out of this field and I have one of those called the SE-51000. Although more expensive, Spook2 Scalar saturates the whole "you" while running the device.
Don built a small generator (SE-51000) of one wire twisted in a helix formation and runs it to the battery and the charge runs over each node point on the helix wound wire cancelling out the EM creating a very small scalar openings from each node point.
This wire is encased on the circuit board! It works! Had it for five years! It is enough scalar produced for "Information" to get through at the speed of light to my target!
If you are interested in a Rife machine only, steer away from the Spooky2 Scalar and go for Spooky Central! It does run rife frequencies both contact pads and still handles, and uses plasma. It costs around $3000.00.
Radionics devices require and important ingredient and that's your natural gift of dowsing for a lack of a better term. It's the prime ingredient using any type of radionics machines, even the Gibbs HDR!
The Spooky Plasma Central is a rife device, it doesn't produce scalar just rife! It cost: $3000.00. Remember True Rife is $7000.00 including all add on modules and GB4000 is $4200+ depending how many accessories you are going to need. It is not ran from your computer, it really doesn't have a program other than a few inside the small generator.
With a radionics device you have to depend on "placebo"! Unless, you have an energetic analyzing software program to verify what you have done or are currently doing is working, placebo is all you got for now, and its hurry up and wait! Chakra's are of the primary source of all your spiritual energies beyond your physical.
Ninety nine percent of all radionics devices, can't access full scalar realm to allow their information to be transported faster than the speed of light!
No one in the USA has created such a device like John Whites Spooky2 Scalar with antenna system and Spooky Central. The company picked up the name from Einstein he called scalar, Spooky!
You can run your Spooky2 Scalar over a plant that is not genetic to grow but only a certain size, whatever plant you know about. Place this in the scalar field 24/7 and see what happens! It's been done by an acquaintance I just met online seen his proof, Wow!
When Spooky Scalar is running, you can’t see, touch, smell or hear or taste of anything happening, while the units are running unless you're a psychic sensitivity.
One can try to energize seeds and then for experiment plant them in a bowl or something. Water them for two to four weeks and see what happens!
You can push the tuning light and you can see the tuning light coming on, indicating energy flow between the transmitter and the receiver are still linked as a coupled device.
This is everything you would have hoped for using real not imagined Scalar Energy could and would do for you and your entire families. There are things you would need to understand the scalar principles. Now we can add Rife to the mix of things.
You will pick it up, with the older TRI-Field METER. Not the companies new ones. You want the model that has the "Sum" under the controls meter.
You can have indication of the energy by placing a fluorescent tube on the output coil. The tube will start to glow from the Tesla Coil producing wireless energies. See short video below. These tests suggest everything is operating as design and producing wireless energy!
Spooky Scalar is the first scalar treatment device to provide three different methods of transmitting healing scalar waves: (Pure Scalar), (Molecular Scalar) and (Rife Scalar).You can choose which of these best suits your needs.
Spooky Scalar has both a sender and receiver. The sender is tuned to the receiver so; they are perfectly linked. There is only a single wire between the two. A scalar field is only produced when the two units are tuned.
I bet when those plasma globes first hit the market they we're the coolest things! Touch the plasma globe and the arc in the plasma would make connection with your fingers as you moved them across the globe. They now have round plates that make great background theater.
They become charge-coupled, effectively becoming one entity; one transmitting regular electrical signals, and the other returning the signals in the form of a scalar field. The lids become a transmitting antenna of scalar energy, with a scalar field between them.
The Scalar waves is going in all directions! So, John and his partners created their "receiver" to absorb the energy (focusing) in one direction towards the two machines.
Like touching a plasma device, you can see it all over the place and when a finger is placed anywhere on the glass, it will focus and streamline the power from the plasma in a single ribbon!
The return path is the space between the lids. The scalar field goes in all directions, but a receiver will absorb this energy, in a similar way to the ionized gas in a plasma ball.
The finger absorbs the energy, and a stream of electrons passes through the glass to the finger. When this happens, the energy becomes more focused. The person being treated sits between the sender and receiver, and they also become a tuned receiver.
Molecular Scalar is adding something into the field itself and the body, when in the field makes contact like that of a capacitor and becomes part of the living circuit, focused like that of a laser system! There are pointer lasers and there are powerful destructive lasers.
Spooky Scalar can be used this way, but there are more options. If a substance is placed on the receiver, molecular modulation alters the returning scalar field. The antenna's built into the lids of both transmitter and receiver.
The modulated information invokes biological changes, as if you have the substance inside your body when connected to the scalar field. Think as if you were actually tuning an old radio using crystals and tuning knobs.
Health products or drugs can also be placed on the receiver coil. Your body then has the effects of the compound and since everyone is different like there fingerprints.
It digitally becomes part of the active scalar field and by placing a single finger in the field the whole body will still light up! But acts differently to your DNA.
This Bio-Well is unique device that reads all your chakras through your energy system using Kirlian Photography taking an energy photo of each of your fingertips and then builds a complete energy model of what is going on inside this energy shell around your body. This can be measured digitally.
The BIO-Well will show you the overall energy around your body, that auric shield that surrounds everyone who lives. There is plenty going on and much suffering for many people, I hope everyone who can find a way to acquire these machines, do so! Any little help can set the tone where one health is going to go into the future.
The Bio-Well's software in part: One of the things it can accomplish is It shows your imbalanced chakra's and their specific colors, whether they are too small or too big or out of line! There are many other system that will be be analyzed and show your meridians and organ numerics.
The GDV does have a chakra music program one can use to help bring them inline and size, this will be helpful for those who don't have any device like a Spooky2 Scalar or similar devices. Many who have such a system like this, may use their own devices to balance their energy bodies and then re-scan with BIO-Well.
Personally, this device is awesome! Yes, $2000.00 is quite the some for this measuring device! It's simple and it's what you need it for. No need to rush and purchase a camera aura set for $7000.00! So, in the scheme of things $2000.00 isn't all that much!
Mostly, it's used to analyze energetic issues, both the "before" and the "after" measurements are taken. But it is up to us to know how to run our healing programs on ourselves, with whatever worked for you in the past or present. Personally I like to know my work was not wasted.
It doesn't have to be TrueRife or Spooky2 Scalar, there are plenty of ultra expensive machines on the markets to fit the bill. I heard of PERL and a few others in or on in the top 10-20 picks in the google browser. All the rest are buried under 500,000,000 other browsing key words.
Below, where you see these example charts, gives a wealth of information! It might just confirm with you why you feel like "hell"! Sorry, for the strong language but quite a few out there would have to agree with me. I want to see if the work I do with Spooky, is well worth the effort.
Below you are looking at captured screenshots when the machine does its final analysis. Do you see those round shape energy pods, those represent your chakra's. See they are not all inline showing your energies out of focus (CHI).
All the above can and does change depending upon one's stressors, if you use your device and you check your chakra's it might show all of them inline for that day! But you received bad news and you are shocked to your core, now check chakra's and you will see either strength or weakness!
Once you settled down, you see the above chakra chart, where all the globes were either off track or still remaining strong! All that stress just caused havoc to your energetic system and if left go long enough will cause future health issues and spiritual and physical weakened wills!
The above charts, are close to an hundred percent right on as far as the energetic body goes! This system doesn't fix all your issues, it is issued as an Energetic Analyzer! We need something like this to ensure us when we use Rife or Scalar or what have you, that we know its working or not for you!
There are a few other analytical programs out there and most are auric programs! There is no getting around this one. I can't afford six or seven thousand dollars and some up to $12,000.00 just to do what the "Bio-Well" can do.
This is as close as you are going to get with accuracy, maybe not 100% but I could do with 50%! As you get better your readings will show such escalations! Are you loving it yet!
The BIO-WELL is designed for scanning the entire human energy body, checking all the meridians and chakra's etc. letting us know if our other instruments, such as Spooky2 Scalar is doing its job or not! Of course, any analytical tool comes in handy for those who use radionics to ensure their program is making the changes needed.
Let's say you are using an elite type expensive radionics box and you ran it over yourself. Before running it, you check your bio-scan with BIO_WELL and got all the base numbers at the start. There is about 7 different analysis with his program.
After about five days or so, you placed each of your digits inside the BIO_WELL and each digit was a picture was taken. Then you click on "Analyze" and brought up the "chakra" to see if all the colored globes were stabilized and aligned with each other. You would be looking for different size individual chakra colored globes!
We went over not all but a good many tools to make it easier for your personal or professional practices. As far as, the USA goes, it will mostly be in the "Personal" category or one can find themselves living with a room mate called, "Bubba"!
Not all software programs are up to the par, the SE-51000 I know works but I am still learning this where the possibilities can be changed into the "Probabilities". The SE-5 was designed to be a "Probability Analyzer". NES system to me is a glorified radionics machine! This one is all objectionable in what it does.
NES and several other high end analytical devices to measure ones energy bodies that connects by Meridians to the main organs, shows us the images by numerical baselines to show us the organs strength and weaknesses.
One other thing I want to procure is Helignosis Life Meter! It will come in handy, when making tinctures, using Spooky2 Molecular Scalar program. Measure the water's life energies before and after placing a program into the liquid!
I was told the best water to use, is Mineral Water when doing any type of tincture. It was suggested that the minerals will help the program become more stable and lasts longer in the mineral solution. I guess what I am trying to say, we all have to come to the point of making a decision, it will start and end ultimately with you all.
