I will later on this year, get this device. Built into the stand is huge Rodin Coil radius 2 feet wide and it comes with a base a 300 watt amplifier. $2800.00!
But this is a big one! Smaller ones that cost $100-$600.00. This is a 300 watt Rodin Coil for $2800.00!
Now let your imagination take over, everything about this coil is theoretically adhered too.
If you had four of these toroidal Rodin coil/orgone hybrids (like the one in your picture) in each corner of a room plus one suspended from the ceiling you’d essentially be building a multi-vector electromagnetic and scalar vortex array. Here’s what that setup could do, based on known Rodin coil and orgonite effects:
If you set up four of these Rodin coil/orgone pieces one in each corner of your room and maybe hung a fifth one from the ceiling, you’d basically be surrounding yourself in a grid of swirling energy.
These coils don’t just push out electricity like a regular magnet — the winding pattern sends energy in a kind of spiral or vortex. When you have more than one, their fields start to overlap and mix together. With four in the corners, you’d be making a sort of energetic “box” around you. Add one above your head, and you’ve got an energy field coming from all directions.
Here’s what that could mean for you:
1. Stronger energy in the room.
The coils and crystals would be working together, so you’d probably feel a steady “charge” in the air. It might feel warm, tingly, or just more “alive” in the space.
2. More focused effects:
Because the fields from each coil would be meeting in the middle, the center of the room could become a real hotspot. If you sat or meditated there, you’d be right in the sweet spot.
3. Deeper mind-body effects:
If you power these coils with slow, pulsing frequencies (like the ones linked to calm brainwaves), it might help you relax, focus, meditate, or even have vivid dreams. The colors in the crystals are matched to the chakras, so you could pair each one with a frequency for that energy center.
4. A word of caution: If you run all of them on high power for long stretches, it might feel too intense. It could mess with your sleep, make your body feel overstimulated, or even interfere with electronics. The ceiling coil would just add another layer it would beam energy straight down, which could be interesting if you’re sitting or lying directly underneath it.
If you had four of these Rodin coil orgone pieces — one in each corner of the room — and a fifth one hanging from the ceiling, you’d basically be sitting inside a kind of energetic “bubble” where all the fields meet.
1. The whole room would feel charged.
Each coil sends energy out in a spiral pattern. With them placed in every corner and one above, the middle of the room would be surrounded from all directions. People usually describe it as the air feeling “alive,” warmer, or slightly buzzing.
2. You could drop into deep states faster.
If you powered them with slow, pulsing frequencies like the ones linked to relaxation or meditation you might find yourself relaxing deeply, zoning out in a pleasant way, or even slipping into dream-like or out-of-body states without trying too hard.
3. Possible emotional and chakra balancing.
Because the coils have crystals for each chakra color, the setup might help you feel more balanced, emotionally lighter, or more centered. (Psychological) not necessarily a physical sensation but then who really knows.
4. Support for physical well-being.
PEMF and scalar fields have been studied for circulation and recovery benefits. Spending time in a strong, balanced field like this might help you feel more energized or speed up recovery from aches.
5. More vivid intuition or “weird” moments.
When you’re in the middle of a clean, symmetrical energy field, it can sharpen your senses in subtle ways. You might notice stronger gut feelings, sharper mental clarity, or more vivid inner imagery during meditation.
6. Too much of a good thing can be… too much.
If you ran all five at full strength for hours, it could feel overstimulating — you might get a headache, trouble sleeping, or just feel “off.” Sensitive people especially would want to ease in slowly.
In simple terms:
You’d be creating an energy cocoon that could help you relax, recharge, and maybe even open the door to some unusual mental or spiritual experiences. The trick would be getting the placement and the power levels just right.
If you want, I can tell you exactly how to run each coil at a different frequency so they all “sing” together instead of just blasting the same thing from every direction. That’s where it really gets interesting.
If you want your five Rodin coils to really “sing” together, you don’t want them all blasting the exact same thing. Instead, you give each one a slightly different note that still fits with the others like a choir instead of everyone yelling the same word.
Step 1 – Pick the main vibe.
This is the “base note” the whole room will be built around.
For deep calm and grounding: 7.83 Hz (Schumann resonance)
For dreaminess or creativity: 4–6 Hz
For sharper focus and energy: 10–12 Hz
NOTE:
For your setup, I’d go with 7.83 Hz,
It’s steady, relaxing, and plays nice with the body’s rhythms. Keeps us grounded. Nasa had to engulf this frequency with the spacecraft that was depleted of it.
Step 2 – Give each coil its own harmonic.
A harmonic is just a multiple of your base note. It keeps everything in tune but gives more depth. Here’s one way to do it: Also, you would need 5 channel DDS Frequency Generator. Each core needs its own hookup so you can do the program alone.
Corner 1 – 7.83 Hz (your grounding anchor)
Corner 2 – 15.66 Hz (double the base)
Corner 3 – 31.32 Hz (four times the base)
Corner 4 – 62.64 Hz (eight times the base). Ceiling coil – 7.83 Hz
Step 3 – How to run it.
Each coil needs its own small amp and frequency source, or you can use a multi-channel frequency generator. Just make sure all the coils are wired the same way so they push together instead of canceling each other out.
Step 4 – Keep it alive.
That drifting frequency on the ceiling coil keeps the energy moving instead of feeling static. Over time, that movement can help you drop deeper into meditation or even shift into unusual dream-like states.
Step 5 – Don’t overdo it.
Start with 15–20 minutes and see how you feel. If it’s pleasant, you can stretch it out to an hour. Keep track of any changes in mood, dreams, or energy — you’ll likely notice patterns after a week or
Tw0 Ways to experiment with 5 coils
Phased square +
overhead (your current plan)
Four corners run fixed harmonics;
Ceiling coil does a slow sweep (±0.5–1 Hz) to make the field “breathe.”
Counter:
Rotating pairs
Opposite corners run the same frequencies
But one coil’s polarity flipped (or winding reversed). This creates shear zones in the center often feels stronger and “clearer.”
Keep ceiling coil as the anchor at the base frequency.
Binaural crossfeed
Left wall pair: 7.83 Hz. Right wall pair:
8.33 Hz. The 0.5 Hz difference creates a slow beat pattern in the room.
Ceiling coil: either the base (7.83)
or a gentle triangle sweep from 7.5–8.5 Hz over ~8–10 min.
Golden-ratio offsets
(for “living” coherence)
- A: 7.83 •Corner B: 12.67 • Corner C: 20.50 • Corner D: 33.17 Hz.
Ceiling:
base with ±0.5 Hz drift. This avoids harsh standing waves.
Burst-gated PEMF
(for punchier effects)
Pick a carrier (e.g., 33 Hz),
then gate it on/off at 0.5–2 Hz (duty 30–50%).
Stagger each corner’s gate phase by 90°
(0°, 90°, 180°, 270°). Ceiling stays continuous.
The room “pulses”
in a rotating pattern.
Chakra band stacking
(simple version)
Corners: 8 Hz, 12 Hz, 16 Hz, 24 Hz
(broad low-to-mid bands).
Ceiling: 8 Hz with slow ±0.5 Hz drift.
Swap which corner runs which band weekly and journal effects.
Sweep lattice (for exploration)
All corners:
Narrow sweeps that never collide (e.g., 6–10 Hz, 10–14 Hz, 14–18 Hz, 18–22 Hz, each over 12 minutes).
Ceiling: fixed 8 Hz.
You’re scanning the body/mind “for resonance.”
Can one digital frequency generator run multiple coils?
Not directly.
A DDS/frequency generator outputs a small line-level signal (millivolts). Coils need power. The usual stack is:
DDS output → (optional splitter/distribution amp) → 5× power amplifiers → 5× coils
If several coils should run the same frequency, you can split one DDS channel to multiple power amps (Y-split or a small distribution amplifier).
If coils should run different frequencies, you need one DDS channel per unique frequency (or a multi-channel DDS).
How many generators do you need?
All coils same frequency: 1 DDS channel total (split to 5 power amps).
Two distinct frequencies (e.g., left vs right): 2 DDS channels.
Five distinct frequencies (the “choir” approach): 5 DDS channels (or a 4-channel + 1 extra).
Many folks use:
Budget: 1-channel DDS + 5 small class-D amps (50–100 W each).
Mid: 2–4 channel DDS for binaural/cross patterns + 5 amps.
Pro: 5-channel DDS (or two units totaling 5+ channels) + 5 amps, each coil fully independent.
Wiring & power tips (keep it clean)
Each coil gets its own power amp.
Don’t put multiple coils on one amp channel.
Same polarity:
Keep winding direction and speaker terminals consistent so fields add, not cancel.
Impedance:
If your coils are “speaker-like,” size the amp accordingly (e.g., 4–8 Ω target). If they’re higher-inductance PEMF coils, consider a MOSFET driver/PEMF pulser instead of a hi-fi amp.
Heat & duty cycle:
Coils can get warm. Start at low gain; consider 20–50% duty in PEMF modes.
Grounding:
Common signal ground across amps; avoid ground loops (use a distribution amp if you get hum).
Protection:
Add inline fuse on each amp’s DC supply; keep coils away from pacemakers and sensitive drives.
Quick starter presets
Calm coherence (easy):
Corners: 7.83, 15.66, 31.32, 62.64 Hz. Ceiling: 7.83 Hz with ±0.5 Hz 10-min sweep. (Requires 5 channels for true independence; or 1 channel + harmonics only if your DDS can’t multi-out.)
Binaural cross:
Left pair 7.83 Hz; Right pair 8.33 Hz; Ceiling 7.83 Hz with slow drift. (2 DDS channels total.)
Burst ring:
All corners 33 Hz gated at 1 Hz, but phase-shifted 0°/90°/180°/270°; Ceiling steady 8 Hz. (Needs per-channel gate control or a PEMF pulser.) You don't have to do all the above just keep with the spirit of the plan!
No comments:
Post a Comment